Description: DMC-2440-G采用一款基于ARM920T 内核的CPU S3C2440A-40构成一个完整的嵌入式系统开发平台。S3C2440A-40主频达到400MHZ，提供64M的SDRAM和256M的NAND FLASH，以及丰富的外设接口。该平台适用于GPS，PDA，MID，移动电视，智能手机，手持设备，平板电脑和广告机等消费类电子产品以及工业控制等领域。支持LINUX2.6和WinCE5.0操作系统。
WinCE5.0驱动支持：IDE/ATA， IIC，USB 摄像头,SD卡, USB 无线网卡,串口，网卡，实时时钟，USB Host，显示，触摸屏，CMOS摄像头，LED，按键，ADC,GPS接收等,支持mediaplay播放器。-DMC- 2440- G by a CPU S3C2440A based on ARM920T kernel- 40 constitute a complete embedded system development platform. S3C2440A- 40 frequency of 400 MHZ, 64 MB NAND FLASH, SDRAM and 256 m and rich peripheral interfaces. The platform is suitable for GPS, PDA, MID, mobile TV, smart phones, handheld devices, tablets and advertising machine and other consumer electronics and industrial control, etc. Support there and WinCE5.0 operating system.
WinCE5.0 driver support: IDE/ATA, IIC, USB camera, SD card, USB wireless network card, a serial port, network CARDS, real-time clock, USB Host, display, touch screen, CMOS camera, LED, buttons, ADC, GPS receiving, etc., to support the mediaplay player. Platform: |
Size: 35840 |
Author:龙芯 |
Hits:
Description: U盘的过滤驱动，实现对U盘文件和信息的功能，可以做二次开发-USB disk filter driver, to achieve the USB disk files and information function, can do two times development Platform: |
Size: 106496 |
Author:silen |
Hits:
Description: UWB精确定位系统，采用DecaWave公司的DW1000进行开发。-Overview of EVB1000 Evaluation Board
• Evaluation board incorporating DecaWave’s DW1000 IEEE802.15.4-2011 UWB compliant wireless
transceiver IC, STM32F105 ARM Cortex M3 processor, USB interface, LCD display and off-board
antenna
• DecaWave’s two-way ranging application, “DecaRanging”, pre-installed
• Industry standard ARM processor with ‘C’ source driver libraries available DecaWave
• Full JTAG accessibility to the ARM processor using an industry standard pin-out header
• Includes an LCD display for reporting of measured range when running “DecaRanging”
• Display can be used for other functions as required depending on user programming
• On–board LED’s to indicate transmit, receive and other messaging states
• Supports USB connection to an external PC if required for more extensive user interface functionality
• Allows development of applications using the TOF/two way ranging/data transfer capability of the
DW1000 IC Platform: |
Size: 751616 |
Author:杨立新 |
Hits:
Description: 淘宝买的资料
1、首先安装编程软件KEIL，安装包放在《单片机开发相关软件》->《KEIL开发软件》。
2、安装下载的串口驱动，安装包也放在《单片机开发相关软件》->《开发板USB转串口CH340驱动》
3、接下来就可以看一下《关盘说明》的文档，理解一下整个关盘资料的结构
4、最后就可以通过我们的例程开始学习单片机了。大家可以通过《51实验例程视频和PPT》里面的视频和PPT结合《51实验例程（C语言）》互相对应来学习。-Taobao to buy the materials
1, first of all programming software KEIL installation, the installation package on the MCU development related software- > the KEIL software development.
2, download the serial port driver installation, the installation package is on the MCU development related software- > USB development board to turn a serial port CH340 drive
3, then you can see the trading instructions document, to understand the whole dish of data structure
4, finally can pass our routines began to learn microcontroller.51 experimental routines you can through the video and PPT, the inside of the video and PPT in combination with the 51 test routines (C) corresponding to each other to learn. Platform: |
Size: 11484160 |
Author:SQC |
Hits:
Description: 读取USB摄像头图像，对图像进行运算处理，并利用windows底层API驱动云台转动，达到跟踪效果，开发环境VS2010+opencv2.4.9,开发语言C++，调试通过。-Read USB camera image, image processing, and the use of the underlying windows API driver head rotation, to achieve tracking effect, development environment VS2010+opencv2.4.9, development language C++, debugging through. Platform: |
Size: 8486912 |
Author:PrudentMe |
Hits:
Description: 实验器材:
探索者STM32F4开发板
实验目的:
学习STM32内部ADC的使用
硬件资源:
1,DS0(连接在PF9)
2,串口1(波特率:115200,PA9/PA10连接在板载USB转串口芯片CH340上面)
3,ALIENTEK 2.8/3.5/4.3/7寸TFTLCD模块(通过FSMC驱动,FSMC_NE4接LCD片选/A6接RS)
4,ADC(STM32内部ADC1,通道5,即:ADC1_CH5)-experiment equipment:
Explorer STM32F4 development board
In this case,
Purpose:
Learn about the use of the STM32 internal ADC
In this case,
Hardware resources:
1, DS0 (connected to PF9)
2, serial port 1 (baud rate: 115200, PA9/PA10 connected to the onboard USB to serial chip CH340 above)
3, ALIENTEK 2.8/3.5/4.3/7 inch TFTLCD module (through the FSMC driver, FSMC_NE4 then LCD chip election/A6 then RS)
4, ADC (STM32 internal ADC1, channel 5, namely: ADC1_CH5) Platform: |
Size: 4402176 |
Author:梧桐雨 |
Hits:
Description: Windows下STM32 USB虚拟串口驱动程序。本人经多次实验发现，必须在开发时，设置CDC的PID和VID两个参数与驱动程序中stmcdc.inf中的数字相同。否则，系统将不可识别STM32的USB口为串口。(STM32 USB virtual serial port driver under Windows. I have many experiments found that must be in development, set the CDC PID and VID, two parameters and the driver in the stmcdc.inf in the same number. Otherwise, the system will not recognize the STM32 port of the USB as the serial port.) Platform: |
Size: 2255872 |
Author:dart86
|
Hits:
Description: 实验器材:
探索者STM32F4开发板
实验目的:
学习DS18B20数字温度传感器的使用.
硬件资源:
1,DS0(连接在PF9)
2,串口1(波特率:115200,PA9/PA10连接在板载USB转串口芯片CH340上面)
3,ALIENTEK 2.8/3.5/4.3/7寸TFTLCD模块(通过FSMC驱动,FSMC_NE4接LCD片选/A6接RS)
4,DS18B20传感器一个(接在PG9上).
实验现象:
本实验开机的时候先检测是否有DS18B20存在，如果没有，则提示错误。只有在检测到DS18B20之后才开始
读取温度并显示在LCD上，如果发现了DS18B20，则程序每隔100ms左右读取一次数据，并把温度显示在LCD
上。同样我们也是用DS0来指示程序正在运行。(Experimental equipment:
Explorer STM32F4 development board
Objective:
Learn the use of DS18B20 digital temperature sensor.
Hardware resources:
1, DS0 (connected to PF9)
2, serial port 1 (baud rate: 115200, PA9/PA10 connection on board USB to serial port chip CH340).
3 inch TFTLCD ALIENTEK, 2.8/3.5/4.3/7 module (via FSMC driver, FSMC_NE4 LCD chip select /A6 RS)
4, one of the DS18B20 sensors (attached to PG9).
Experimental phenomena:
This experiment first detects whether there is DS18B20 when starting up. If not, it prompts errors. Only after the detection of DS18B20 did it begin
Read the temperature and display it on LCD. If DS18B20 is found, the program reads data once every 100ms or so and displays the temperature at LCD.
On. Similarly, we also use DS0 to indicate that the program is running.) Platform: |
Size: 4118528 |
Author:ck_xiaofei |
Hits:
Description: 实验器材:
探索者STM32F4开发板
实验目的:
学习MPU6050 六轴传感器(三轴加速度+三轴陀螺仪)的使用.
硬件资源:
1,DS0(连接在PF9)
2,串口1(波特率:115200,PA9/PA10连接在板载USB转串口芯片CH340上面)
3,ALIENTEK 2.8/3.5/4.3/7寸TFTLCD模块(通过FSMC驱动,FSMC_NE4接LCD片选/A6接RS)
4,KEY0按键(连接在PE4)
5,MPU6050传感器(连接在PB8(SCL),PB9(SDA)上面,INT(PC0)未用到).
实验现象:
本实验开机后，先初始化MPU6050，然后利用DMP库，初始化MPU6050及使能DMP，最后，在死循环里面不停
读取：温度传感器、加速度传感器、陀螺仪、DMP姿态解算后的欧拉角等数据，通过串口上报给上位机（温
度不上报），利用上位机软件（ANO_Tech匿名四轴上位机_V2.6.exe），可以实时显示MPU6050的传感器状
态曲线，并显示3D姿态，可以通过KEY0按键开启/关闭数据上传功能。同时，在LCD模块上面显示温度和欧拉
角等信息。DS0来指示程序正在运行。另外,本例程也可以通过USMART调用MPU_Read_Byte/MPU_Write_Byte
等函数,来实现对MPU6050寄存器的读写操作(仅在UPLOAD OFF状态下).(Experimental equipment:
Explorer STM32F4 development board
Objective:
Learn the use of MPU6050 six axis sensor (three axis acceleration + three axis gyroscope).
Hardware resources:
1, DS0 (connected to PF9)
2, serial port 1 (baud rate: 115200, PA9/PA10 connection on board USB to serial port chip CH340).
3 inch TFTLCD ALIENTEK, 2.8/3.5/4.3/7 module (via FSMC driver, FSMC_NE4 LCD chip select /A6 RS)
4, the KEY0 button (connected to PE4)
5, the MPU6050 sensor is connected to PB8 (SCL) and PB9 (SDA), and INT (PC0) is not used.) Platform: |
Size: 6556672 |
Author:ck_xiaofei |
Hits:
Description: 硬件资源:
1,DS0(连接在PF9),DS1(连接在PF10)
2,串口1(波特率:115200,PA9/PA10连接在板载USB转串口芯片CH340上面)
3,ALIENTEK 2.8/3.5/4.3/7寸TFTLCD模块(通过FSMC驱动,FSMC_NE4接LCD片选/A6接RS)
4,按键KEY0(PE4)/KEY1(PE3)/KEY2(PE2)/KEY_UP(PA0,也称之为WK_UP)
5,LAN8720(通过RMII接口驱动)
实验现象:
本实验开机后，程序初始化LWIP，包括：初始化LAN8720A、申请内存、开启DHCP服务、添加并打开
网卡，然后等待DHCP获取IP成功，当DHCP获取成功后，将在LCD屏幕上显示DHCP得到的IP地址，如
果DHCP获取失败，那么将使用静态IP（固定为：192.168.1.30），然后开启Web Server服务，并
进入主循环，等待按键输入选择需要测试的功能：
KEY0按键，用于选择TCP Server测试功能。
KEY1按键，用于选择TCP Client测试功能
KEY2按键，用于选择UDP测试功能(Experimental equipment:
Explorer STM32F4 development board
Objective:
Learn the use of STM32F4 network function, and combine LWIP to learn network communication.
Hardware resources:
1, DS0 (connected to PF9), DS1 (connected to PF10)
2, serial port 1 (baud rate: 115200, PA9/PA10 connection on board USB to serial port chip CH340).
3 inch TFTLCD ALIENTEK, 2.8/3.5/4.3/7 module (via FSMC driver, FSMC_NE4 LCD chip select /A6 RS)
4, the key is KEY0 (PE4) /KEY1 (PE3) /KEY2 (PE2) /KEY_UP (PA0, also known as WK_UP).
5, LAN8720 (driven by RMII interface)) Platform: |
Size: 2495488 |
Author:ck_xiaofei |
Hits:
Description: 硬件资源:
1,DS0(连接在PF9)
2,串口1(波特率:460800,PA9/PA10连接在板载USB转串口芯片CH340上面)
3,ALIENTEK 2.8/3.5/4.3/7寸TFTLCD模块(通过FSMC驱动,FSMC_NE4接LCD片选/A6接RS)
4,按键KEY0(PE4)/KEY1(PE3)/KEY2(PE2)/KEY_UP(PA0,也称之为WK_UP)
实验现象:
本实验开机的时候先显示提示信息，然后等待串口输入接收APP程序（无校验，一次性接收），在串口接收
到APP程序之后，即可执行IAP。如果是SRAM APP，通过按下KEY0即可执行这个收到的SRAM APP程序。如果
是FLASH APP，则需要先按下KEY_UP按键，将串口接收到的APP程序存放到STM32的FLASH，之后再按KEY1即
可以执行这个FLASH APP程序。通过KEY2按键，可以手动清除串口接收到的APP程序。(Experimental equipment:
Explorer STM32F4 development board
Objective:
Learn the IAP function of STM32 and master the use of IAP.
Hardware resources:
1, DS0 (connected to PF9)
2, serial port 1 (baud rate: 460800, PA9/PA10 connection on board USB to serial port chip CH340).
3 inch TFTLCD ALIENTEK, 2.8/3.5/4.3/7 module (via FSMC driver, FSMC_NE4 LCD chip select /A6 RS)
4, the key is KEY0 (PE4) /KEY1 (PE3) /KEY2 (PE2) /KEY_UP (PA0, also known as WK_UP).) Platform: |
Size: 6282240 |
Author:ck_xiaofei |
Hits:
Description: 单片机开发常用软件，包含usb转串口驱动软件，stc单片机烧录软件，KEIL C开发环境等。(SCM commonly used software development, including USB to serial port driver software, STC microcontroller burning software, KEIL C development environment.) Platform: |
Size: 35185664 |
Author:淞仔 |
Hits:
Search - USB Driver Development